Make Sure Your Battery Is Safe Just By Keeping It Clean



Did you ever need to jump start your car only to discover that the battery was mired in crud? If you were wondering what the gunk was, it was battery decay, formed by acid condensation. It might be cleaned by a simple chemical solution, since it has been formed by an acid. Something as standard as baking soda may easily clean the battery acid. You'll want to take some precautions, but safe cleaning of your battery is simply following a few instructions.

You have got to first find the supplies you need, most of which are in your home. The basic tools you will need are a pair of safety glasses to protect your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Various open-end and box wrenches, a plastic or metal scraper, cleaning brushes for a battery terminal, and a turkey baster or perhaps a small funnel. A few sponges or perhaps clean cloths, a spray bottle with all-purpose household cleaner, some rubber gloves and a large container of clean water. It may look like a whole lot of stuff to clean the equipment, but it will keep it safe and non-hazardous.

Because the corrosive deposits contain sulfuric acid, it is best to use rubber gloves and the safety glasses. Be mindful never to get the deposits on the car since it will damage the car's paint job. Depending on the amount of dirt and decay on the battery, the cleaning can vary, and some of the steps might not be necessary. If you want the battery to become very clean, you will need to remove the battery from the vehicle. First use the plastic or metal scraper to get off whatever dirt you can, and also use the bristle brush.

Next step will be to mix one tablespoon of baking soda with a pint of water and add the solution to the battery and the cable connection using the funnel or turkey baster. After this you utilize the brush to remove the excess deposits plus be sure to disconnect the cables for easier cleaning. You can remove the cables, beginning with negative first then positive, using the pliers and wrenches. For other elements of the battery, use the brush to remove the deposits then flush with the baking soda solution.

If perhaps you can find some dirt and grease remaining, use the spray household cleaner and sponge to remove them. Following that, dry all the components with a clean cloth and reassemble everything plus be sure that the cable is connected image source positive first. At last, make certain that everything is anchored and now you have a clean and safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *